English
| Quantity: | |
|---|---|
BSFT
SNTOOM
Copper core motor – Powerful and stable operation, low failure rate.
Thickened carbon steel case – Precise cutting, high hardness, shockproof and anti-falling.
Large thickened blades – Not easy to rust, resistant to oil stains, strong wind with lower noise.
Explosion-proof design (dIIBT4) – Suitable for flammable gas environments, safe for industrial use.
Duct ready – Can be equipped with air ducts: 5m / 10m / 15m / 20m.
Waterproof and sun-resistant – Works outdoors without worrying about rain or sun exposure.
Protective net cover – Prevents hard objects from entering and protects hands from operational errors.
Thickened steel motor bracket – Reduces vibration and lowers running noise.
Place the fan on a flat, stable surface in a well-ventilated area. Ensure no obstacles block the air inlet or outlet.
If using with an air duct, securely connect the duct to the fan outlet. Choose from 5m, 10m, 15m, or 20m lengths.
Connect the power cord to the correct voltage (380V / 220V / 110V / 36V depending on the model). Make sure the power source matches the fan rating.
Turn on the fan and check for normal operation. Listen for unusual noise and feel for excessive vibration.
For portable use, move the fan only after power is disconnected.
Always disconnect power before moving, cleaning, or maintaining the fan. Do not insert objects through the protective net while the fan is running. Keep the fan away from water immersion, although it is rainproof. Regularly check the blades and motor bracket for looseness or damage. Do not modify the internal wiring or explosion-proof structure.
The BSFT series flameproof portable axial flow fan is built for tough industrial environments. It combines high air volume, low noise, and durable construction to keep worksites safe and well-ventilated.
One of the standout features is the copper core motor. It delivers stable, powerful performance with low failure rates, even under continuous use. The thickened carbon steel case is precision-cut for high hardness, offering good shockproof and anti-falling protection.
The fan uses large thickened blades that resist rust and oil stains. They move a strong stream of air while keeping noise levels lower than many standard fans. A protective net cover prevents hard objects from entering and protects hands from accidental contact. The thickened steel motor bracket helps reduce vibration and further lowers running noise.
This fan carries an explosion-proof mark of dIIBT4, which means it can be safely used in areas where flammable gases or vapors may be present, such as factories, warehouses, and chemical sites. It is also waterproof and sun-resistant, so outdoor use in rain or direct sun is not a problem.
For flexible installation, the BSFT fan can be equipped with air ducts in lengths of 5m, 10m, 15m, or 20m. Multiple voltage options are available: 380V, 220V, 110V, and 36V. Models range from BSFT-200 to BSFT-500, with blade diameters from 200mm to 500mm, power from 0.15kW to 0.75kW, and air volume up to 10,000 m³/h.
In conclusion, the BSFT series is a robust, low-noise, and explosion-proof ventilation solution. Its solid construction, high air output, and safety features make it a practical choice for industrial, warehouse, and outdoor work sites.
