The liquid-cooled transformer is a device that converts AC voltage, current, and impedance. When there is an AC in the primary coil, an AC magnetic flux is generated in the iron core (or magnetic core), so that a voltage (or current) is induced in the secondary coil. So how to operate and maintain the liquid-cooled transformer? Let's take a look together next.

So far, the H-class Dry-type transformer has a very small share in my country's Dry-type transformer market, among which there are only a few influential manufacturers. Do you know what an H-level Dry-type transformer is? Do you know, what is the development prospect of an H-level Dry-type transformer? Let's take a look together next. Here are some answers.

The Oil sealed transformer adopts a fully oil-filled sealed type. The corrugated oil tank shell is a permanently sealed oil tank with its elasticity to adapt to the expansion of the oil. Oil sealed transformer has been widely used in various power distribution equipment. Next, let's take a look at the installation and performance characteristics of Oil sealed transformer. Here are some answers.

We know that a liquid-cooled transformer is often used in our lives, so how to prevent the liquid-cooled transformer from burning out? Let's take a look together next.

In the 1980s, the annual output of epoxy resin cast transformers was about 1000MVA, and by the 1990s, it had exceeded 10000MVA. The insulation class of Dry-type transformer has covered Class B, Class F, Class H, and Class C. Next, let's take a look at the Dry-type transformer structure types and structural features. Here are some answers.